ADLINK cExpress-BT2 - Manual (Page 10)

Page 10 cExpress-BT2
2.5. Video
¾ GPU Feature Support: 7th generation graphics Intel core architecture with four execution units supporting two independent displays
• 3D graphics hardware acceleration
• Support for DirectX 11, OpenCL 1.1, OpenGL ES Halti/2.0/1.1, OpenGL 3.2
• Video decode hardware acceleration including support for H.264, MPEG2, MVC, VC-1, WMV9 and VP8 formats
• Video encode hardware acceleration including support for H.264, MPEG2 and MVC formats
• Playback of Blu-ray disc 3D content using HDMI (1.4a spec compliant with 3D)
Note: Availabililty of features may vary between operating systems.
¾ Display Interface Support
• Dual-channel 18/24-bit LVDS
Through eDP-to-LVDS bridge (use DDI0 signal of SoC)
• VGA
Analog VGA supporting resolutions of up to 2560x1600x24bpp @60Hz
2.6. Audio
¾ Integrated: Intel® HD Audio integrated in SoC
¾ Audio Codec: located on carrier Express-BASE2 (ALC886 standard support)
2.7. LAN
¾ Intel MAC/PHY: Intel® i210 (MAC/PHY) Ethernet controller
¾ Interface: 10/100/1000 GbE connection
2.8. Multi I/O and Storage
¾ Integrated in SoC
¾ USB: 7x USB 1.1/2.0 (USB 0/1/2/3/4/5/6, ports 3~6 from USB hub)
¾ SATA: one SATA 3Gb/s (SATA0)
build option two SATA 3GB/s (SATA0, SATA1) when PATA bridge is not used (lose PATA function)
¾ PATA: one PATA port (through SATA to PATA bridge)
¾ eMMC: soldered on module bootable eMMC flash storage 8GB or 16GB or 32GB (optional)
¾ GPIO: 4 GPO and 4 GPI with interrupt
2.9. TPM (Trusted Platform Module)
¾ Chipset: ATMEL AT97SC3204 (optional)
¾ Type: TPM 1.2