Specifications, Physical specifications, Figure 2-6 – ADLINK Express-HRR User Manual
Page 17: Connector locations (bottom side), Table 2-4, Weight and footprint dimensions, Hardware monitor, Board controller
Chapter 2
Product Overview
Express-HRR
Reference Manual
13
Figure 2-6. Connector Locations (Bottom Side)
Specifications
Physical Specifications
lists the physical dimensions of the module.
Table 2-4. Weight and Footprint Dimensions
Item
Dimension
NOTE
Overall height is measured from the
upper board surface to the highest
permanent component on the upper
board surface. This measurement does
not include the cooling solutions. The
heights of the board with the cooling
solutions are 36.50mm for the passive
heatsink (without fan), 46.80mm for the
active heatsink (with fan) and 11.00mm
for the heatspreader.
Weight
0.09 kg (0.20 lb)
Height (overall)
9.20 mm (0.36 inches)
Board thickness
2.362 mm (0.093 inches)
Width
95.00 mm (3.74 inches)
Length
125.00 mm (4.92 inches)
Express-HRR_Bottom_Conn_a
Key:
CN1 - XDP
CN6 - COM Express A1-A110 and B1-B110
CN7 - COM Express C1-C110 and D1-D110
SW1 - PCI Express Bifurcation Switch
C D
CN7
CN1
SW1
CN6
A B
1
2
3
4