ADLINK Express-IB - Manual (Page 10)

Page 10 Express-IB
2.11. TPM (Trusted Platform Module)
¾ Chipset: Infineon SLB9635TT1.2
¾ Type: TPM 1.2
2.12. Fan Control
¾ Control Source: Temperature Sensor
¾ Location
• On AB connector (B101/102): PWM and TACH 12V based on carrier
• 4-pin Mini connector on module: PWM and TACH 5V based on module
¾ Connection: route single source to dual locations
2.13. Debug
¾ JTAG: SFF connector for XDP to CPU
¾ LPC header: for mounting POST CODE assembly
2.14. Power Specifications
¾ Power Modes: AT and ATX mode (AT mode start controlled by ADMT)
¾ Standard Voltage Input: ATX = 12V±5% / 5Vsb or AT = 12V±5%
¾ Wide Voltage Input: ATX = 8.5~19V / 5Vsb or AT = 8.5 ~19V
¾ Power Management: ACPI 3.0 compliant, Smart battery support.
¾ Power States: supports C1-C6, S0, S1, S4, S3, S5 (Wake on USB S3/S4, WOL S3/S4/S5)
2.15. Mechanical and Environmental
¾ Standard Operating Temperature: 0 to 60°C (Wide Voltage Input)
2.16. Specification Compliance
¾ PICMG COM.0: Rev 2.1 Type 6, basic size 125 x 95