7 chipset setup, Hda controller, Onboard lan bios init – ADLINK cPCI-3615 User Manual

Page 108: Onboard lan1/2 and vga output select, Initial graphics adapter, Clkgen spread spectrum, Chipset setup

BIOS Setup

8.7

Chipset Setup

Select the Chipset tab from the setup screen to enter the Chipset
BIOS Setup screen. You can select any of the items in the left
frame of the screen to go to the sub menu for that item. The
Chipset BIOS Setup screen is shown below.

HDA Controller

Set this value to Enable/Disable the HD Audio Controller.

Onboard LAN BIOS Init

Set this value to enable/disable the invoking of onboard LAN’s
PXE ROM. Disabling can shorten the POST time by not initializing
LAN PXE ROM. Enable it if boot from LAN is needed.

Onboard LAN1/2 and VGA Output Select

Set the Onboard LAN1/2 and VGA output to Front or Rear.

Initial Graphics Adapter

Select which graphics controller to use as the primary boot device.

ClkGen Spread Spectrum

Set this value to Enable/Disable the ClkGen spread spectrum
function.