ADLINK ND-6017 - Manual (Page 65)

Command Set • 57
3.20 Enable/Disable CJC
@Description
To disable/enable CJC of ND-6011/D and ND-6018
@Syntax
$(Addr)C(Status)
$ Command leading code (1 character)
(Addr) Address ID (2 character)
C Disable/enable CJC command (1 character)
(Status) 0: Disable
1: Enable
@Response
!(Addr)
or
?(Addr)>
! Command is valid.
? Command is invalid.
(Addr
)) Address ID (2 character)
@Example
User
command: $02C1
Response: !02
To enable CJC and module’s address is 02H.
(6011/D, 6018)