ADLINK ND-6017 - Manual (Page 48)

40 • Command Set
Code Baudrate
03 1200 bps
04 2400 bps
05 4800 bps
06 9600 bps
07 19200 bps
08 38400 bps
09 115200 bps
Table 3-2 Baud rate setting code
Figure 3-1 Data Format Setting of Analog Input Modules
7 6 5 4 3 2 1 0
Reserved
Must to be 0
Checksum
0: disable
1: enable
Analog Input Data Format
00: Engineering units
01: % of Full Scale Range
10: Two’s complement of hexadecimal
11: Ohms (6013 only)
Note:
6017/6018 only support engineering
units.
6013 supports engineering units and
ohms display.