ADLINK PCIe-2602 - Manual (Page 59)

Function Library 49
PCIe-2602-FLR
Parameter(s)
Number
The number of the SDI channel, with allowed values from 0
to 31.
Value
State of the DO channel of SetDigitalIOSelector is between
0 to 3, with the following values:
0: Low
1: High
2. State of all DO channels if Channel of SetDigitalIOSelec-
tor is 0xFFFFFFFF, with the following values:
bit n = 0: Low
bit n = 0: High
where n is from 0 to 3 representing the state of DO0 to DO3
respectively.
Return Value
No error occurs if return value ≥ 0; if a negative value, please refer
to Other Functions for return code error information.
2.4.6 Audio Format Functions
Bits Per Sample
Sets or retrieves the number of bits per sample.
Syntax
C/C++
int Sdi_SetAudioBitsPerSample (UINT Number,
UINT Value)
int Sdi_GetAudioBitsPerSample (UINT Number,
UINT& Value)
C#
int SetAudioBitsPerSample (uint Number, uint
Value)