ADLINK PXIS-2630 Series - Manual (Page 21)

Troubleshooting • 15
4
Troubleshooting and
Preventative Maintenance
4.1 Troubleshooting the PXIS-2650 series
Please refer to Table 4.1 to troubleshoot the PXIS-2650 series chassis.
The table lists possible causes for power failure and recommends ways to
correct the problem.
Table 4.1 Troubleshooting
Possible Cause What to Do
PXIS-2650 series is not
connected to power source. Make sure that the PXIS-2650 series is
connected to a live electrical outlet. Try
operating another piece of equipment
from this outlet.
Power switch is not switched
on. Make sure the power switch is set to the
ON position.
Power supply has failed. Contact ADLINK for repair.
The Alarm Buzzer is beeping
Temperature LED flashes:
Fan LED flashes:
Push Alarm RST button to stop beeping
and refer to Chapter 2.3 to find out which
alarm occurs.
Cool down the PXIS-2650 system under
50
°C.
Refer to Chapter 4.4 for the fan hot-swap
replacement.