ADLINK PCIe-7200 - Manual (Page 20)

Installation 11
2 Installation
This chapter describes how to install the 7200 series. Package
contents and unpacking information are described. Because the
7200 series is a Plug and Play device, there are no jumper or DIP
switch settings for configuration. The interrupt number and I/O port
address are assigned by the system BIOS during system boot up.
2.1 Contents
In addition to this User's Manual, the package includes the follow-
ing items:
 PCI-7200 or PCIe-7200 Digital I/O & Counter Card
 ACL-10437: 40-pin to 37-pin D-Sub cable
or
 cPCI-7200 Digital I/O & Counter Module for 3U
 ADLINK CD
 Software Installation Guide
If any of these items is missing or damaged, contact the ADLINK
dealer. Save the shipping materials and carton to ship or store the
product in the future.