Dolby Laboratories DP572 - Manual (Page 9)

Dolby E Multichannel Distribution System User Manual
ix
Preface
Regulatory Notices
FCC
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with this instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his or her own expense.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
UL
Troubleshooting must be performed by trained technicians. Do not attempt to service this
equipment unless you are qualified to do so.
WARNING: Check that the correct fuses have been installed. To reduce the risk of
fire, replace the fuses only with the same type and rating.
Exposed portions of the power supply are electrically “hot.” In order to reduce the risk of
electrical shock, the power cord MUST be disconnected when the cover of this equipment
is removed.
The ground terminal of the power plug is connected directly to the chassis of the unit. For
continued protection against electric shock, a three-pin power outlet that is correctly wired
and earthed must be used. Do not use a ground-lifting adapter and never cut the ground pin
on the three-prong plug.