Dolby Laboratories DP572 - Manual (Page 58)

Dolby E Multichannel Distribution System User Manual DP572 Dolby E Decoder
4-10
PCM Delay
Selects the PCM Input channel for headphone monitoring.
4.2.4 Headphone Map
Figure 4-7 Headphone Map menu
This menu provides the allowable channel-to-headphone mappings based on the Program
selected in the Headphone Prog menu.
4.2.5 System Settings
Figure 4-8 System Settings menu
Remote control functions are not yet available for the initial Dolby E product release,
so this menu is useful only during firmware upgrades (see the next section).
DP572 Unit Setup
Headphone Map
Headphone Map
L=LFE R=LFE
Headphone Map
L=L R=R
Enter Esc
Headphone Map
L=Ls R=Rs
The mappings above are for a 5.1-channel configuration
Mappings for a four-channel configuration are: L=L R=R, L=C R=C, L=S R=S
Mapping for a two-channel configuration is: L=L R=R
Mapping for a single-channel configuration is: L=C R=C
Headphone Map
L=C R=C
DP572 Unit Setup
System Settings
System Settings
Unit Address
System Settings
Unit Name
Remote Baud Rate
9.6 kbps
Unit Address
8280
Unit Name
Dolby E Encoder
Remote Baud Rate
38.4 kbps
Remote Baud Rate
19.2 kbps
System Settings
Remote Baud Rate
Enter
Enter Enter Enter
Esc
Esc Esc Esc