Deutsche Telekom T-Eumex 504PC SE - Manual (Page 96)

88
You can update your Eumex 504PC SE system software yourself. This may be neces-
sary when new features become available. You can download the newest version
from the Internet under the following address:
http://www.telekom.de/faq, where you click on "Endgeräte und Downloads"
(Devices and Downloads) in the next screen on "T-ISDN," then on "ISDN-Telefonanla-
gen" (ISDN communications systems) and finally on "Eumex 504PC SE." There you
click on "Treiber/Software" (Drivers/software), then select the file you want to down-
load.
Read the description in the Internet to determine which file is used for your operating
system, save this file to your hard disk, uninstall the previously used Eumex 504PC SE
system software in accordance with your operating system, then start the down-
loaded file.
While the software is uploading to the Eumex 504PC SE, the communications system
is deactivated, i.e. no calls can be made and any existing calls are disconnected. The
procedure takes approximately one minute, after which the Eumex 504PC SE is fully
operational again. The update does not affect your current configuration.
The system software update program can be found in the folder created by the instal-
lation program when the complete installation described at the beginning is carried
out.
You start the FlashLoad program by double clicking, by selecting the Windows Start
button, or by invoking it in the CAPI icon pop-up menu (see p. 85) and following the
instructions on the screen.
FlashLoad (Updating the Communications System Software)
FlashLoad