Deutsche Telekom T-Eumex 504PC SE - Manual (Page 58)

50
Configuration via Telephone
Your Eumex 504PC SE can save up to 100 telephone numbers, which you can then
dial conveniently using the speed-dialling code digits 00 to 99.
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 61.
Select a double-digit memory location number from 00 to 99
(= speed-dialling code).
Enter the telephone number (up to 24 digits are possible). Do not enter a leading 0,
even in the case of manual external line access seizure.
Press the R-key. You hear a positive acknowledgement tone.
Replace the handset.
Repeat the above procedure for every telephone number/speed-dialling code.
Tip: You can also save all procedures containing the star and hash keys as "tele-
phone numbers." You can thus save the entire call transfer procedure (see p. 30) as a
speed-dialling telephone number, and then activate or deactivate it by means of the
double-digit speed-dialling code.
Deleting Individual/All Speed-dialling Numbers
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 60.
Enter the memory location (i.e. the speed-dialling code, 00 to 99) of the number to be
deleted. If you want to delete all speed-dialling numbers, press the star key twice
instead of the memory location.
Press the hash key. You hear a positive acknowledgement tone.
Replace the handset.
b
6 1
t
t
r q
d
b
6 0
t
# q
d
Storing Numbers for Speed Dialling