Deutsche Telekom T-Eumex 504PC SE - Manual (Page 20)

12
Connecting Devices
You can connect up to four analogue terminals to your communications system.
We recommend you to deploy terminals that feature DTMF dialling and a flash func-
tion. Terminals with pulse dialling cannot perform functions requiring the R-key (e.g.
enquiry calls), or the star or hash keys (e.g. setting features). Please refer to the sec-
tion entitled "Setting the Dialling Mode" on p. 16.
You can connect the analogue terminals directly to the TAE ports on the EUMEX
504PC SE, or you can run 2-wire cable to remote TAE sockets. You will find the con-
nectors beneath the semi-circular silver-coloured cover.
The cables connecting the Eumex 504PC SE to the analogue terminals must not be
longer than 300m.
Connecting a Computer to the Eumex 504PC SE
Insert a serial connector cable or the correct end of the Eumex 504PC SE USB cable
in the corresponding V.24 or USB socket
. Insert the other end in the corre-
sponding socket on the PC.
You do not need a computer to operate and configure the Eumex 504PC SE. How-
ever, a PC simplifies the system programming, while the communications software
includes a range of further useful applications.
The software on the CD-ROM supplied is easiest to install on your PC before you
connect it to the Eumex 504PC SE.
For further details, please refer to p. 66 ff.
Connecting Analogue Terminals to the Eumex 504PC SE