Deutsche Telekom T-Eumex 504PC SE - Manual (Page 57)

49
Configuration via Telephone
Your Eumex 504PC SE can save up to three emergency numbers. These numbers
can always be dialled from every telephone, independent of the external line access
rights that otherwise exist.
You save the emergency numbers as follows:
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 62.
Enter the number of the memory location (01, 02 or 03), and press the star key.
Enter the emergency number (up to 24 digits are possible) and press the hash key.
You hear a positive acknowledgement tone.
Replace the handset.
Repeat the above procedure for each emergency number. Please refer to the note in
the chapter entitled "Special Settings/Features" on p. 38.
Note: You can set up three emergency numbers (110 and 112 are preset), which can
always be dialled from a telephone, independent of any external line access rights
that may exist. You can also use the emergency number memory to save an area
code. Telephones without external line access can thus be used to call numbers in
this area, while all other external calls remain blocked.
You delete emergency numbers as follows:
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 63.
Enter the memory location you want to delete (01, 02 or 03), and press the hash key.
You hear a positive acknowledgement tone.
Replace the handset.
Deleting Emergency Numbers
b
6 2
t *
t # q
d
b
6 3
t # q
d
Storing Emergency Numbers