Deluxe features, Meat probe, Warning – Dacor DISCOVERY EO User Manual
Page 27: Turning the oven off using stop time, 25 pm
![background image](/manuals/73162/27/background.png)
25
The stop time and day will appear on the display.
•
press the
•
start key. If you did not enter a start
time, the oven will start immediately and stop at the
stop time entered. If you entered a start time “WaIt-
InG to start” will appear on the display. The oven
will turn on at the start time that was entered and
stop cooking at the stop time entered.
If you are using one of the cook settings, when the
•
stop time is reached, the oven will go into “HolD”
mode for 2 hours. The oven will reduce the tempera-
ture to about 150°F to keep the food warm and safe
for serving. At the end of the hold cycle, the oven will
turn off and “CYCle ComPlete” will appear on the
display. press CanCel/seCure to clear the control
panel.
Making Changes or Canceling While the
Oven is “WAITING TO START”
If you want to change the temperature, meat probe,
•
or delay settings while the oven is waiting to start:
○ Press
edit (if you have a double oven press the
edit key below the word uPPer or Lower on
the display).
○ Change the settings that need to be changed, then
press
Start.
If you want to
•
cancel the delayed start, press the
uPPer on/oFF or loWer on/oFF key, for double
ovens. For single ovens, press CanCel/seCure.
Meat Probe
When you cook foods like roasts and poultry,
the internal temperature is the best way to tell
when the food is properly cooked. Your oven’s meat
probe takes the guesswork out of roasting. You can use it
to cook food to the exact temperature you desire. You can
select meat probe settings from 100°F to 200°F.
warning
To prevent the possible of burns, connect and unplug the
meat probe using hot pads.
ImPortant:
use the handle to insert and remove the meat probe
•
skewer. Also, use the handle on the meat probe plug
to insert and disconnect it. pushing or pulling on either
end of the cable could damage the meat probe.
Continued...
Deluxe Features
The duration time will appear on the display.
•
press the
•
start key.
If you did not enter a start time, the oven will start
•
immediately and stop after the amount of dura-tion
time entered has elapsed. If you entered a start time
“WaItInG to start” will appear on the display.
The oven will turn on at the start time that was
entered and stop cooking after the amount of duration
time entered has elapsed.
If you are using one of the cook settings, when the
•
duration time expires, the oven will go into “HolD”
mode for 2 hours. The oven will reduce the tempera-
ture to about 150°F to keep the food warm and safe
for serving.
Turning the Oven Off Using Stop Time
After you have set the start time, press the
•
stoP
tIme key.
enter the time of day you want the oven turn off
•
using the keypad. For example, to turn off the oven
at 1:10pm, press 1, then 1, then 0, then am - Pm if
necessary.
If you want to turn off the oven on a different day,
•
press the stoP DaY key repeatedly until the correct
day appears just above the key itself.
▲ UPPER
START SUN 4/03 10:00 AM
STOP SUN 4/03 11:35 AM
12:25 PM
PRESS START
HH:MM
DURATION TIME
STOP
TIME
DELAY
START
DURATION
TIME
HELP
▲ UPPER
START SUN 4/03 10:00 AM
12:25 PM
PRESS START
10:00 AM
DELAY START
DURATION
TIME
HELP
STOP
TIME
RESET
AM - PM
PM
START DAY
SAT 4/02
▲ UPPER
START SUN 4/03 10:00 AM
STOP SUN 4/03 10:00 AM
12:25 PM
PRESS START
10:00 AM
STOP TIME
DURATION
TIME
HELP
RESET
AM - PM
PM
START DAY
SAT 4/02
STOP
TIME
▲ UPPER
START SUN 4/03 10:00 AM
STOP SUN 4/03 1:10 PM
12:25 PM
PRESS START
1:10 PM
STOP TIME
DURATION
TIME
HELP
RESET
AM - PM
PM
START DAY
SAT 4/02
STOP
TIME