Dacor EO User Manual
Eo, po, mov & moh, Planning guide, 27, 30” wide, single, discovery wall ovens
PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
1.9
27, 30” Wide, Single,
Discovery Wall Ovens
EO, PO, MOV & MOH
NOTES:
1. 24” (610mm) minimum interior cabinet depth.
Back of cabinet may need to be removed.
2. 3/4” (19mm) support platform (flush with cutout).
1/2
CUTOUT DIMENSIONS
“C”
“A”
“B”
31 1/4” (794mm)
Recommended
(May be Altered)
1 ¾“ (45mm) Min.
Clear to Top of
Door for Heat
Exhaust
4“ Typical Toe Kick (Shown)
Recommended
Electrical
Location
Alternate
Electrical
Location
3/4” (19mm)
Support Platform
1“ (25mm) Min.
Clear to Top of
Door for Heat
Exhaust
CUTOUT DIMENSIONS
INSTALLED UNDER-COUNTER
36” Typical
(914mm)
1 1/2”
(38mm)
Typical Counter
“A”
“B”
1 ¾“ (45mm) Min.
to Combustible Floor
4“ Typical Toe Kick (Shown)
Recommended
Electrical
Location
3/4” (19mm)
Support Platform
1“ (25mm) Min. to Combustibles
Model
Number
Cutout
Height
“A”
Cutout
Width
“B”
Min. Cabinet
Width
“C”
EO127
27 7/16”
(697mm)
25 1/2”
(648mm)
27”
(686mm)
PO127
MOV127
MOH127
EO130
28 1/2”
(724mm)
30”
(762mm)
PO130
MOV130
MOH130
3. 1/8” (3mm) minimum clearance from appliance to
adjacent cabinet doors/drawers.
4. Two (2) Single Ovens are not approved in a stack
configuration.
1 ¾” (45mm) Min.
to Combustible Floor
“A”
“B”
“A”
“B”
1 1/2” (38mm)
Typical Counter
4“ Typical Toe Kick (Shown)
Alternate
Electrical
Locations
3/4” (19mm)
Support Platform
4“ (102mm) Min.
Between Cutout
3/4” (19mm)
Support Platform
Recommended Electrical Location
1“ (25mm) Min. to Combustibles
36” (914mm)
Typical
CUTOUT DIMENSIONS
SIDE-BY-SIDE
INSTALLED UNDER-COUNTER
Revised
10/22/07