Dimplex DFB6016 - Manual (Page 9)

9
11 ¾”
(29.8 cm)
cm) high X 11 ¾ inch (29.8
cm) deep (Figure 2).
Plan your electrical power
5.
supply (refer to noTE 1).
Option #1 - The power cord can
be lead from behind the trim and
along the wall to an outlet near
the fireplace.
Option #2 - A new outlet can be
installed inside the new frame
construction.
Dimplex Mantel Surround
Kit or Custom Made
Mantel Surround
select a suitable location that 1.
is not susceptible to moisture
and is away from drapes,
furniture and high traffic.
Place the fireplace in the 2.
desired location to see how it
will look in the room.
For ease of electrical hook
3.
up you may wish to locate
the fireplace near an existing
outlet (refer to noTE 1).
store the fireplace in a safe
4.
dry and dust free location.
Assemble the mantel
5.
surround kit (refer to the
mantel assembly instructions)
or construct the custom
surround with an opening of
30 ¾ inch (78.1 cm) wide X
25 ¾ inch (65.4 cm) high X
11 ¾ inch (29.8 cm) deep
(Figure 2).
WARNINg: Do not attempt
to wire your own new outlets
or circuits. To reduce the risk
of fire, electric shock or injury
to persons, always use a
licensed electrician.
Site Selection and Preparation
Figure 2
30 ¾”
(78.1 cm)
25 ¾”
(65.4 cm)