Maintenance, Glass cleaning, Fireplace surface cleaning – Dimplex DFB6016 User Manual
Page 15

15
Upper Light Bulb Requirements
Quantity of two (2) clear chande-
lier or candelabra bulbs with an
E-12 (small) socket base, 15 Watt
rating.
To replace the top light bulbs:
Locate the two upper bulbs
1.
inside the firebox at the top
(Figure 8).
Examine the bulbs to
2.
determine which bulbs require
replacement.
Hold the socket while
3.
unscrewing the bulb.
Hold the socket while
4.
screwing in the new bulb.
glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the clear door may
Maintenance
Figure 7
Back
Ledge
Log
Ember
bed
Rear
Tab
side section
Figure 8
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
Fireplace Surface
Cleaning
use a cloth dampened with
warm water only to clean painted
surfaces of the electric fireplace.
Do not use abrasive cleaners.