Denon AVR-686S - Manual (Page 39)

36
Advanced Operation Advanced Operation
ENGLISH
Remote control unit operations during
multi-source playback (selecting the source)
1 Set the MODE 1 switch to the “AUDIO”.
2 Set the MODE 2 switch to the “ZONE2”.
3 Press the ZONE2 ON button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
MODE 2 MODE 1
ZONE2 ON
ZONE2 OFF
INPUT
SELECTOR
VOLUME
CHANNEL
4 Press the INPUT SELECTOR button.
The ZONE2 source switches directly.
5 The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
VOLUME button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
– – – dB (MINIMUM)
6 When the ZONE2 SOURCE function is set to
TUNER, the preset channel can be selected
pressing the
CHANNEL button on the remote
control unit.
ENGLISH
This is only possible when the main unit in the ZONE2 mode
(
page 43).