Denon AVR-686S - Manual (Page 22)

ENGLISH
19
Basic Operation Basic Operation
Dolby Pro Logic II x (Pro Logic II ) mode
• To play in the PL II x mode, set “S. BackSp” at the “Speaker
Configuration” setting to “1sp” or “2sp”.
• To play in the PL II x mode, set “Surround Back” at the “Power
Amp Assign.” setting.
1 Press the STANDARD button to select the Dolby
Pro Logic II x mode.
• The Dolby Pro Logic II indicator lights.
Lights
2 Play a program source.
For operating instructions, refer to the manuals of the
respective components.
SELECT SURROUND PARAMETER
STANDARD
ENTER
STANDARD
SURROUND
PARAMETER
CURSOR F CURSOR G
The mode switches as shown below each time the button
is pressed.
DTS NEO:6 DOLBY PL II x
5 Press the SURROUND PARAMETER button to
select the various parameters.
The mode switches as shown below each time the button
is pressed.
• When the Cinema mode:
MODE CINEMA CINEMA EQ
DEFAULT SURROUND BACK
TONE DEFEAT
3 Press the SURROUND PARAMETER button to
select the surround parameter mode.
MODE MUSIC TONE DEFEAT
DIMENSION PANORAMA
SURROUND BACK
DEFAULT CENTER WIDTH
• When the Music mode:
MODE GAME TONE DEFEAT
DEFAULT SURROUND BACK
• When the Game mode:
4 Turn the SELECT knob, and press the CURSOR
F F or G G button to select the optimum mode for
the source.
When the “SURROUND BACK” parameter is set to “ON”.
(Set “S. Back” at system setup to “Small” or “Large”.)
(Pro Logic II x Cinema mode)
(Pro Logic II x Music mode)
(Pro Logic II x Game mode)
When the “SURROUND BACK” parameter is set to “OFF”.
(Set “S. Back” at system setup to “None”.)
(Pro Logic II Cinema mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
MODE DOLBY PL
DEFAULT SURROUND BACK
CINEMA EQ TONE DEFEAT
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
• When the Dolby Pro Logic mode:
6 Turn the SELECT knob, and press the CURSOR
F F or G G button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
• Cinema EQ setting:
C I N E M A E Q O F F
ON OFF
ENGLISH