beautypg.com

Care and maintenance, Cutter blade maintenance – Dixon Zeeter 16246-0803 User Manual

Page 33

background image

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

CAUTION

Stop engine and remove ignition key for

safety. Wear heavy, thick gloves when
holding onto cutter blade, avoid the sharp
edge of the blade.

Blades should be discarded when worn excessively.

Check sharpness of mower blades after every 10
hours of operation. Observe proper blade position prior
to removal.

1. Safely raise front of mower.

2. Hold or block blade from

turning.

3. Loosen blade bolt and

remove blade.

4. When replacing blade,

tighten blade bolt securely.
Refer to diagram. Be sure

blade iscentered on pilot
before tightening bolt to 60

ft. lbs.

DANGEROUS!
DO NOT USE
BLADE IN THIS
CONDITION!

When notch starts,
discard blade

New Blade

33