Specifications, Zeeter hl 36 – Dixon Zeeter 16246-0803 User Manual
Page 15
ZEETER HL 36”
CHASSIS:
11 gauge welded channel frame
BODY:
All body parts made of rotational molded polyethylene.
Front body contains access panel for battery service.
MOWER DECK:
11 GA laser cut fabricated. Two blades, 36” cut width.
Cut height approximately 1-1/2”- 4” via 7-position lift
handle.
BLADE DRIVE:
Electric clutch
TRANSMISSION:
Each rear wheel is independently driven by a Hydro Gear
EZT self contained hydrostatic drive.
ENGINE:
13 HP Briggs & Stratton I/C, 4-cycle, single cylinder, air-
cooled, gasoline, vertical shaft, aluminum head and block,
cast iron sleeve, AVS balanced
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive.
TIRES:
Front
9 x 3.50-4 Turf Tread
Rear
16 x 6.50-8 Turf Tread
RECOMMENDED
Front
16-21 PSI
TIRE PRESSURE:
Rear
8-14 PSI
CAPACITIES:
Fuel
1.8 gallon
Engine
1.25 quarts oil
DIMENSIONS:
Width
34” outside rear wheel measurement
Width
50.5” overall width of deck with deflector
Height
32” to top edge of seat
Length
67” hitch tab to front
Weight
445 lbs.
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
15
SPECIFICATIONS