Denon S-32 - Manual (Page 29)

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Inf
or
mation
ENGLISH
Tr
oubleshooting
Symptom Cause Countermeasure Page
For some
radio stations,
“Server Full”
or “Connection
Down” is
displayed and
station cannot be
connected to. • Station is congested or not
currently broadcasting.
• Wait a while before trying again. –
Sound is broken
during playback. • Network’s signal transfer speed
is slow or communications lines
or radio station is congested.
• This is not a malfunction. When
playing broadcast data with a
high bit rate, the sound may
be broken, depending on the
communications conditions.
–
Sound quality is
poor or played
sound is noisy. • File being played has a low bit
rate.
• This is not a malfunction. –
Symptom Cause Countermeasure Page
Continuous noise
is heard when
receiving FM
programs • Antenna cable is not properly
connected.
• Connect the antenna cable
properly.
• Connect an outdoor antenna.
5
5
Hissing or
continuous noise
is heard when
receiving AM
programs • This may be noise from a TV or
interference from a radio station.
• Turn off the TV.
• Change the position and direction
of the AM loop antenna.
–
–
G TunerH
G Wireless LANH
Symptom Cause Countermeasure Page
Cannot connect
to network. • The settings of the SSID
and network key (WEP) are
incorrect.
• The reception is poor and the
signals cannot be received.
• There are multiple networks and
the usable channels overlap.
• Match the network settings with
the S-32’s settings.
• Shorten the distance from the
wireless LAN’s access point,
remove any obstacles and
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
• Set the access point’s channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
6
–
–
Played sound is
interrupted or
sound cannot be
played. • There are multiple networks and
the usable channels overlap.
• Set the access point’s channel
settings away from the channels
used for other networks.
Alternatively, connect using a
network cable.
–