beautypg.com

Troubleshooting, English – Denon S-32 User Manual

Page 28

background image

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Inf
or

mation

ENGLISH

If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner
s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.

Troubleshooting

Symptom

Cause

Countermeasure

Page

Display not lit
and sound not
produced when
power switch set
to on.

• Power cord not plugged in

securely.

• Plug the power cord into the wall

power outlet.

7

Display lit but
sound not
produced.

• Device you want to play and set

input source do not match.

• Volume control set to minimum.
• MUTING is on.

• Select an appropriate input

source.

• Turn volume up to suitable level.
• Switch off MUTING.

12

12
12

Display is dim.

• Dimmer function is on.

• Turn the dimmer function off by

pressing the DIMMER button.

13

G

GeneralH

G

Remote Control UnitH

Symptom

Cause

Countermeasure

Page

Set does not work
properly when
remote control
unit operated.

• Batteries are worn.
• You are operating outside of the

specified range.

• Obstacle between main unit and

remote control unit.

• The batteries are not inserted in

the proper direction, as indicated
by the polarity marks in the
battery compartment.

• The set’s remote control sensor

is exposed to strong light (direct
sunlight, inverter type fluorescent
bulb light, etc.).

• Replace with new batteries.
• Operate within the specified

range.

• Remove the obstacle.

• Insert the batteries in the

proper direction, following the
polarity marks in the battery
compartment.

• Move the set to a place in which

the remote control sensor will
not be exposed to strong light.

2
2

2

2

2

Symptom

Cause

Countermeasure

Page

iPod cannot be
played.

• Input source is not right.

• iPod is not properly mounted in

dock for ipod.

Select an appropriate input
source.

• Remount the iPod.

16

5

G

iPodH

Tr

oubleshooting

Symptom

Cause

Countermeasure

Page

The file names
are not displayed
properly (“...”, etc.).

• Characters that cannot be

displayed are used.

• This is not a malfunction. On

this set, characters that cannot
be displayed are replaced with a
“ . (period)”.

Files stored on a
computer cannot
be played.

• Files are stored in a non-

compatible format.

• You are attempting to play a file

that is copyright protected.

• Record in a compatible format.

• Files that are copyright protected

cannot be played on this set.

13

13

Internet radio
cannot be played.

• Ethernet cable is not properly

connected

or

network

is

disconnected.

• Program is being broadcast in

non-compatible format.

• The computer’s or router’s

firewall is activated.

• Radio station is not currently

broadcasting.

• IP address is wrong.

• Check the connection status.

• Only Internet radio programs in

MP3 and WMA can be played on
this set.

• Check the computer’s or router’s

firewall settings.

• Choose a radio station that is

currently broadcasting.

• Check the set’s IP address.

6

14

9, 10

Server is not
found, or it is
not possible to
connect to the
server.

• The computer’s or router’s

firewall is activated.

• Computer’s power is not turned

on.

• Server is not running.
• Set’s IP address is wrong.

• Check the computer’s or router’s

firewall settings.

• Turn on the power.

• Launch the server.
• Check the set’s IP address.

9, 10

Cannot connect to
preset or favorite
radio stations.

• Radio station is not currently

broadcasting.

• Radio station is not currently in

service.

• Wait a while before trying again.

• It is not possible to connect to

radio stations that are no longer
in service.

G

NETH