Denon S-32 - Manual (Page 11)

Get
ting Star
ted
Set
up
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
ENGLISH
Format Bit rate Per minute Per hour
MP3 / WMA
MPEG-4 AAC
128 kbps Approx. 1 MB Approx. 60 MB
192 kbps Approx. 1.5 MB Approx. 90 MB
256 kbps Approx. 2 MB Approx. 120 MB
392 kbps Approx. 3 MB Approx. 180 MB
WAV (LPCM) 1400 kbps Approx. 10 MB Approx. 600 MB
FLAC 1080 kbps Approx. 7.7 MB Approx. 464 MB
(1 MB = 10 6 bytes)
Required System
n Broadband Internet Connection
A broadband line connection to the Internet is required in order to
use the S-32’s Internet radio function.
n Modem
This is a device that is connected to the broadband line to
communicate with the Internet.
n Router
When using the S-32, we recommend you to use a router equipped
with the following functions:
• Built-in DHCP (Dynamic Host Configuration Protocol) server
This function automatically assigns IP addresses on the LAN.
• Built-in 100 BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
n Ethernet Cable (CAT-5 or greater recommended)
The S-32 does not come with an Ethernet cable.
Purchase a cable of the required length.
n Computer
A computer with the following specifications is required to operate
the music server:
• OS
Windows® XP Service Pack2, Windows Vista
• Software
.NET Framework 1.1, Windows Media Connect (Windows XP),
Windows Media Player Ver.11
• Internet browser
Microsoft Internet Explorer 5.01 or later
• LAN port
• 300 MB or more free disk space
b
Free space is required to save music files. The following sizes are
approximate.
• Depending on the server, video files may be displayed, but they
cannot be played on the S-32.
• For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
• The types of routers that can be used depend on the ISP. Contact an
ISP (Internet Service Provider) or a computer shop for details.
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
n Others
• If you have an ISP contract for a line on which network settings are
made manually, make the settings at “Network Setting” (vpage
9, 10).
• When using a broadband router (DHCP function), the S-32 makes
the network settings automatically, so there is no need to make
them yourself.
• If connecting the S-32 to a network with no DHCP function, make
the settings at “Network Setting” (vpage 9, 10).
• The S-32 is not compatible with PPPoE. A PPPoE-compatible router
is required if you have a contract for a line of the type with which
the PPPoE is set.
• Depending on the ISP with which you have your contract, it may
be necessary to make proxy server settings to use the Internet
radio function. If you made proxy server settings on the computer
to connect to the Internet, make the same proxy server settings on
the S-32.
• The S-32 uses the DHCP and Auto IP functions to make the network
settings automatically.
n Ethernet Cable (CAT-5 or greater recommended)
No Ethernet cable is included with the S-32. Procure a cable with
the necessary length.
NOTE
Be sure to use a shielded type cable for Ethernet connections.
Depending on the connected computer/router, there may be much
noise generated from the cable.
Connections
Power cord (Supplied)
To household power outlet
(AC 230 V, 50 Hz)
Connecting the Power Cord
NOTE
• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC inlet.
Protector circuit
The protection circuit will be activated in the following cases:
• When the temperature around the set is extremely high
• When the set is used for long periods of time with a high output
and the internal temperature rises
Speaker output is suspended when the protector circuit operates.
In this case, remove the power cord, make sure there is adequate
ventilation and wait for the main unit to cool down. Afterwards, re-
insert the power cord.
If the protection circuit is activated again even though there are no
problems with the wiring or the ventilation around the unit, switch off
the power and contact a DENON service center.