Specifications, Fm tuner section, Aivi tuner section – Aiwa AV-D50 User Manual
Page 19: Usable sensitivity antenna, Amplifier section, Outputs, Front, General, Dolby pro logic
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SPECIFICATIONS
FM tuner section
Tuning range
87.5 MHz to 108 MHz
Usable sensitivity 13.2 dBf
(IHF)
Antenna terminals 75 ohms (unbalanced)
AIVI tuner section
Tuning range
Usable sensitivity
Antenna
530 kHz to 1710 kHz (10 kHz step),
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Amplifier section
Power output
[Stereo Mode]
Total harmonic
distortion
Inputs
Outputs
Front
130 watts per channel, Min. RMS at 8
ohms, from 40 Hz to 20 kHz, with no
more than 0.9% Total Harmonic
Distortion
[Dolby Pro Logic or 5.1 CH Mode]
Front
120 watts per channel, Min. RMS at 8
ohms, from 40 Hz to 20 kHz, with no
more than 0.9% Total Harmonic
Distortion
Rear (Surround)
60 watts per channel, Min. RMS at 8
ohms, 1 kHz, with no more than 0.9%
Total Harmonic Distortion
Center
120 watts, Min. RMS at 8 ohms, 1
kHz, with no more than 0.9% Total
Harmonic Distortion
0.08 % (85 W, 1 kHz, 8 ohms, Front)
AUDIO IN
PHONO: 2.5 mV, adjustable (47
kohms)
CD: 250 mV, adjustable (47
kohms)
TAPE MONITOR: 350 mV (47
kohms)
VIDEO 1/DVD/MD, VIDEO 2/LD/
TV, VIDEO 3, AUX: 250 mV,
adjustable (47 kohms)
5.1 INPUT
FRONT, CENTER: 560 mV (47
kohms)
SURROUND, SUB-WOOFER:
400 mV (47 kohms)
VIDEO IN: 1 Vp-p (75 ohms)
AUDIO OUT (REG OUT): 200 mV (1
kohm)
VIDEO OUT (MONITOR): 1 Vp-p (75
ohms)
SUPER WOOFER: 1,2 V
FRONT SPEAKERS IMP: 80/40
selectable (front speakers A and B):
with the SPEAKER IMPEDANCE
SELECTOR set to 40, accepts
speakers of 4 ohms,
with the SPEAKER IMPEDANCE
SELECTOR set to 80, accepts
speakers of 8 ohms or more.
SURROUND SPEAKERS IMP: 80
(surround speakers): accepts
speakers of 8 ohms or more
Muting
General
Power requirements
Power consumption
Dimensions
(W X H X D)
Weight
CENTER SPEAKER IMP: 80/40
selectable
with the SPEAKER IMPEDANCE
SELECTOR set to 40, accepts
speaker of 4 ohms,
with the SPEAKER IMPEDANCE
SELECTOR set to 80, accepts
speaker of 8 ohms or more.
PHONES (stereo jack): accepts
headphones of 32 ohms or more
-20 dB
120 VAC, 60 Hz
230 W
430
X
155
X
351 mm
(17x6 Vs x13Vs in.)
11.2 kg (24 lb 11 oz.)
ss
UJ
:Z
UJ
Ü
Specifications and external appearance are subject to change
without notice.
uuu SYSTEM
The word “BBE” and the “BIBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” the double-D symbol □□ and ’’PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
ENGLISH 18