Aiwa CX-NA22 - Manual (Page 15)

PROGRAMiVIED EDIT RECORDING
37
.
8.9
5
4,5
37
.
8.9
Programmed edit function enabies CD recording whiie checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1 Insert the tape into deck 2.
insert the tape with the side to be recorded on first facing out
from the unit.
2 Press the CD button and load the disc(s).
3 Press the EDIT/CHECK button twice while
pressing the SHIFT button on the remote control.
“Al EDIT” is surrounded by red and PRGM is displayed.
4 Press the numbered buttons on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Tape length
Maximum recording
time for side A
r—N.
Tape side A (front side)
5 Press the one of the DISC DIRECT PLAY buttons
to select a disc.
Then, press the numbered buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIRECT PLAY 2 button, then press the + 10 and 0 buttons.
Remaining
time of side A
Programmed tracks
r
R.
/i
I U
Total number of
programmed tracks
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannotbe programmed.
7 Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming B on the display, repeat step 5.
ROCK POr JA2Z
I n . n ~ f
3 u * u u
,< !\
IIP'MII Jj
I
iliiiliiiiiB
IM
a
z
□
a
o
o
lU
tr
8
Tape side B (reverse side)
Press the EDIT/CHECK button while pressing the
SHiFT button to select side A and press the #
REC button to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last truck programmed for side A,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 9.
9 Press the EDIT/CHECK while pressing the SHIFT
button on the remote control for recording of
the second side.
B is displayed.
fO Turn over the tape in deck 2 and press the •
REC button to start recording.
Recording starts.
To stop recording
Press the ■ button. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing
the SHIFT button on the remote control to select side A or B, and
press the ◄◄ or ►► button repeatedly.
Program Disc Programmed track
number number numbers
I I I I I
I ■ LI I !
I iJ ,
................. I
Tape side
■IJ
I
'.a,-', ij
2
10
12
Track number
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button
on the remote control to select side A or B, and press the ■
CLEAR button to clear the program of the selected side. Then
program tracks again.
_
To clear the edit program
Press the ■ button twice so that red line surrunding “Al EDIT”
disappears on the display.
ENGLISH
1 4