Aiwa XR-MT1000 - Manual (Page 33)

PROGRAMMED EDIT RECORDING
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed.
NOTE
The programmed edit recording will not start from a point haifway
in the tape. The tape must be recorded on from the beginning of
either side.
1 Insert the tape into deck 2, and press DOLBY NR
to turn Dolby NR on or off.
insert the tape with the side to be recorded on first facing out
from the unit.
2 Press CD on the stereo receiver and load the
disc(s).
3 Press EDIT/CHECK on the remote control twice.
“EDIT” and “PRGM” are highlighted.
'• When “Al” is highlighted, press EDIT/CHECK again.
4 Press the numbered buttons on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
» The ◄◄, ►► is aiso available to designate the tape iength.
:
.
■ ■ : .....................
I-- ^
I----- 1/ " ! M i I .
Tape iength Maximum recording
time for side A
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7 Press EDIT/CHECK on the remote control to
select side B and program the tracks for side B.
After confirming “b” on the dispiay, repeat step 5.
HEPEAT RANDOM IPRGMI Al
_ ;■■■■■; . f'; f";
; ; ■ ■ i i i i
:■■■■■; ■■■■
8 Press #REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the
iead segment is piayed through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press BSTOP on the cassette deck or on the CD player (or
■ CLEAR on the remote control). Recording and CD play stop
simultaneously.
To clear the edit program
Press BSTOP twice on the CD player (or BCLEAR twice on
the remote control) in stop mode so that the highlighted indicator
“EDIT” on the display disappears.
To check the order of the programmed track numbers
In stop mode, press EDIT/CHECK on the remote control to select
a side, and press ◄◄ or ►► on the CD player repeatedly.
Disc number
......
Program number
i i
...n :
I
Track number
■ ■
■ :
Programmed track
numbers
!li^
O
Ul
Q
Ul
Ul
(A
0)
if
U
To change the program of each side
Press EDIT/CHECK on the remote control to select a side, and
press BSTOP on the CD player (or BCLEAR on the remote
control) to clear the program on the selected side. Then program
tracks again.
' Up to 30 tracks can be programmed from any of the inserted
discs.
■ Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons 0-9 and + 10
on the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0.
Track number
"1 n....... i 1 '
i I J
u.
Remaining
time on side A
o
Programmed
tracks
Program number Tape side ,
a: First recording side (side A)
b: Second recording side (side B)
ENGLISH
33