Aiwa XR-MT1000 - Manual (Page 26)

PROGRAMMED PLA
Up to 30 tracks can be programmed from any of the inserted
discs.
-RANDOM/
REPEAT
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press BSTOP (or ICLEAR on the remote control) in stop mode.
To add tracks to the program
Repeat steps 3 and 4 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After
programming the tracks, press RANDOM/REPEAT.
“REPEAT” is highlighted on the display.
During programmed play, you cannot use random play, check
the remaining time, or select a disc or track.
Use the remote control.
1 Press CD and insert the discs.
2 Press PRGM twice in stop mode.
“PRGM” is highlighted.
GM |AI EDJT
■iiiliiiiiag
• When the PRGM is pressed once in step 1, the unit enters
the KARAOKE PROGRAM (page 27).
3 Press Disc DiRECT PLAY, then press numbered
buttons 1-3 within 3 seconds to seiect a disc.
Go to the next step when the tray stops rotating.
4 Press numbered buttons 0-9 and -hlO to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Program number
.■■I M ■. - . . y . - ;-!■ ':vl AiiC;,[:,ii
• ■
0_ l | ■=>
Total playing time of
selected tracks
iEEV r;-'r.COM -'"CM A i t ! I'
! :■ ■ :■ :
..... ■■■■; ■
.....
V.
Selected track number Total numbers of selected tracks
5 Repeat steps 3 and 4 to program other tracks.
6 Press (or ►IIPLAY/PAUSE on the CD
piayer) to start piay.
26
ENGLISH