Denon AVR-787 - Manual (Page 28)

Basic Operation Basic Operation
25
ENGLISH
ENGLISH
Selecting the Dolby Pro Logic II x (Pro Logic II )
mode
Press [STANDARD] to select “DOLBY PL II x”.
Play a program source.
DOLBY PL II x
NEURAL SURROUND
DTS NEO:6
Press SURROUND PARAMETER .
It is possible to play analog input signals and digital input signals (2-
channels) in the surround mode.
This mode is optimal for playing program sources recorded in Dolby
Surround.
Press D D H H to select the item, then press F F G G to set.
When “MUSIC” mode is selected:
PANORAMA:
This is effective when the surround effect seems weak.
DIMENSION:
This shifts the center of the sound field image to the front or surround
side. This compensates for when the sound field image seems
unbalanced. (0 to 6, default : 3)
CENTER WIDTH:
A natural expansion to the front can be achieved by adjusting the
center signal’s output balance between the center and front channels.
(0 to 7, default : 3)
Press ENTER or SURROUND PARAMETER .
Press F F G G to select the play mode.
1
2
3
4
CINEMA:
This mode is suited for playing movie sources recorded in Dolby
Surround and general sources recorded in stereo.
MUSIC:
This mode is suited for playing stereo music signals in the surround
mode. With music signals, the sound field expansion differs according
to the type of music, the recording conditions (live/studio), etc..
Because of this, the MUSIC mode offers a number of optional
parameters for further adjusting the sound field.
GAME:
This mode is optimum for games. The GAME mode can only be
used for 2-channel audio sources.
PL:
This mode is compatible with conventional Dolby Pro Logic sources.
5
6
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
D H F G
[ON SCREEN]
[STANDARD]
SURROUND
PARAMETER
D H F G
ENTER
F G, ENTER
SURROUND PARAMETER D H
3
4
(When “MUSIC” is selected)
5