American Dryer Corp. 30 lb. Stacked Models - Manual (Page 5)

IMPORTANT INFORMATION
RECEIVING AND HANDLING
The dryer is shipped in a protective
stretch
wrap cover and protective
cardboard corners and top cover as a
means of preventing damage in transit.
Upon delivery, the dryer and wooden skid
should be visually inspected for shipping
damage. If any damage whatsoever is
noticed, inspect further.
When dryers have been damaged in
shipment, follow these procedures:
1. All dryers should be inspected upon
receipt and before they are signed for.
2. If there is suspected damage or actual
damage, the trucker's receipt should
be so noted.
3. If the dryer is damaged beyond repair,
it should be refused. Those dryers
which were not damaged in a
damaged shipment should be
accepted, but the number received
and number refused must be noted on
the receipt.
4. If you determine that the dryer has
been damaged after the trucker has
left your location, you should call your
local freight terminal immediately and
request
an inspection and freight
claim form. The freight company
considers this concealed damage.
This type of freight claim is very
difficult when a day or two passes
after the freight was delivered.
5. Freight claims are the responsibility
of the consignee, and all claims must
be filed at receiving end. Manufacturer
assumes no responsibility for freight
claims or damages.
IMPORTANT: THE DRYER SHOULD BE
TRANSPORTED AND HANDLED IN AN
UPRIGHT POSITION AT ALL TIMES.
SAFETY PRECAUTIONS
1. Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
2. Purchaser/user should consult the
local gas supplier for proper
instructions to be followed in the event
the user smells gas. The instructions
should be posted in a prominent
location.
3. Dryer must be exhausted to the
outdoors.
4. Although this commercial dryer is a
very versatile machine, there are
some articles that, due to fabric
composition
or cleaning method,
should not be dried in it.
WARNING: DRY ONLY WATER-
WASHED FABRICS. DO NOT DRY AR­
TICLES SPOTTED OR WASHED IN DRY
CLEANING SOLVENTS, A COMBUSTI­
BLE DETERGENT, OR “ALL
PURPOSE’’ CLEANERS. FIRE OR EX­
PLOSION COULD RESULT.
WARNING: DO NOT DRY RAGS OR
ARTICLES COATED WITH GASOLINE,
KEROSENE, PAINT, W A X , OIL, OR
GREASE. FIRE OR EXPLOSION
COULD RESULT.