Description of panels, Front panel, Rear panel – A&D Journal Printer AD-8118A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Description of Panels
Front Panel
@
© Cover for setting section
Remove this cover and use
the DIP switches to set,
otherwise keep it attached to
prevent dust from getting
inside.
@ Printer cover
Remove this cover to change
printing
paper
and/or
ink
ribbon,
This lights up when the power is on. ® Operation keys For operation, refer to "Operating the Switch Keys," . Rear Panel © ® (D © Connector for power cable Refer to "Connection of Power Supply/Ground," . © POWER switch Turn OFF when not using. © Fuse 0.5A 100V to 120V{blow) 0.3A 200V to 240V(blow) @ Standard serial input connector Input of RS-232C or current loop for data. Refer to "Connection of Serial Input,". ® Select switch for input mode This switch is used to select RS-232C or current loop for serial inputs. Refer to "Serial Inputs,". ® Connector for control I/O This is the I/O area that "Connection of Control I/O,". Page 6 owners-AD-8118A-V.3.3
controls the printer. Refer to