A&D Journal Printer AD-8118A - Manual (Page 16)

The FEED key will advance the paper by one line and the PRINT key will
print the function message and the data currently in the setting format.
Press and immediately release the SET UP key to update and escape the
Function mode. The functions will be printed and the unit will return to
setting mode.
F1-1,F2-2,F3-1,F4-1
FUNCTION SET END
Function Mode Options
F1-Printing Mode
There are two types of FI printing modes:
(1) The Auto mode prints input data automatically. The printing
timing can be controlled either manually or by using the auto
printing mode.
(2) The Manual mode only prints when the PRINT key is pressed
or a command is input. The printing timing can be controlled on
the main unit if the device connected is set to stream.
Set value of FI Printing mode Description
FI -1 Manual printing 1 Adds and prints at addition printing,
(initial setting)
FI -2 Manual printing 2- Adds only at addition printing.
FI -3 Auto printing Prints the data.
FI -4 Auto addition Adds the data.
FI -5 Auto addition/printing Adds and prints the data.
F2- Lines to feed
Sets the number of feeding lines after printing the data or the
cumulative total by a number from 0 to 9. default is "2".
F3- Input mode
Select either gross weight, net weight, tare weight, or ail three. This
function is used when connecting a weighing indicator {ex. AD-4322,
AD-4323, AD-4325A) to several peripheral devices (external indicator,
etc.) (refer to ’‘Connection to Peripheral Devices,"). Otherwise, set to "1
(All enable)."
Set value of F3 input mode
F3-1 All enable (initial setting)
F3-2 Gross weight
F3-3 Net weight
F3-4 Tare weight
owners-AD-8118A-v.3.a Page 15