A&D Journal Printer AD-8118A - Manual (Page 17)

F4- Statistics mode
This mode can get maximum data .minmum data ,average data
.standard deviation, sample range of cumulated data and prints out
these. The Statistics caluclates all data no concernning with code
data.
Set value of F4 mode
F4-0 No caluclation of statistics (initial setting)
F4-1 Sample deviation (an-i)
F4-2 Standard deviation (an)
Time Setting Mode
Press the TOTAL key while at the same time pressing the SET UP key.
Now change the date and time to their correct settings. You will be
prompted with the following screen:
10/26/90 2:35 PM
A
To set the date and time use the following keys:
TOTAL key
M+.PRT key
CLESR key
SET UP key
Shifts the mark to the right, the mark indicates
which input can be changed.
Increases the number.
Decreases the number.
Press the SET UP key when done. This stores the date
and time to memory and the following message is
printed:
10/26/90 7:35 AM
CLOCK SET END
If any set value is wrong a message is printed, the value is not stored and
the unit remains in the time setting mode. Set the value again.
10/66/90 7:35 AM
A
CLOCK SET ERROR
Page 16 owners-AD-8118A-v.3.a