Repair parts list, Legend, Repair parts illustration – A.O. Smith Water Heater User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REPAIR PARTS ILLUSTRATION
When ordering repair parts always give the following information:
1.
Model, serial, and product number
2.
Type of gas
3.
Item number
4.
Parts description
Repair Parts List
Item
No.
Parts Description
1
DRAFT HOOD
2
REDUCER RING - SOME MODELS
3
FLUE BAFFLE
4
HEATTRAP/NIPPLES(COLD) - SOME MODELS
5
HEAT TRAP/NIPPLES (HOT) - SOME MODELS
6
COLD WATER DIP TUBE
7
ANODE ROD
A
8
TEMPERATURE & PRESSURE RELIEF VALVE
(LOCATED TOP OR SIDE)
■
9
DRAIN VALVE
10
GAS CONTROL VALVE/THERMOSTAT(with wire ieads)
^
11
OUTER DOOR
12* * PILOT/PILOT TUBE ASSEMBLY KIT (Natural Gas)
★
13*
PILOT/PILOT TUBE ASSEMBLY KIT (L.P Gas)
★
14*
BURNER (Natural Gas)
★
15*
BURNER (L.P. Gas)
★
16*
MANIFOLD DOOR ASSEMBLY (Natural Gas/LowNox)
^
17*
MANIFOLD DOOR ASSEMBLY (L.P. Gas)
★
18*
TWO PIECE WIRE CONNECTOR
WITH RETAINER CLIP
★
19*
MANIFOLD DOOR GASKET
★
20*
VIEW PORT ASSEMBLY
21*
PIEZOELECTRIC IGNITER BUTTON
22*
THERMOCOUPLE
‘Pictured on next page.
LEGEND
^ Special anode rod (see Anode Rod/Water Odor
section)
■ Temperature and Pressure Relief Valve is required,
but may not be factory installed
★ Unique: FVIR System parts
32