Memorizing the new equalization curves, Geq dh, 4 within 4 seconds, press enter – Aiwa NSX-A909 User Manual
Page 10: To select the stored equalization curve, Selecting a programmed dsp surround mode, Di sco, To display the current dsp surround mode, To cancel the selected mode, When the music source is monaural, 6eq iil
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORIZING THE NEW EQUALIZATION
CURVES
PSURROUN
Up to 4 customized equalization curves can be stored as the
manual modes M1 - M4.
1 Set a new equalization curve with HIGH, LOW,
and MULTI JOG.
See “SETTING ANEW EQUALIZATION CURVE MANUALLY”.
The created curve is displayed for 4 seconds.
GEQ DH
2 Within 4 seconds, press ENTER.
“M 1” flashes on the display for 4 seconds.
iligii
6EQ iil
• If this step is not completed within 4 seconds, press GEQ
first to display “GEQ ON”. Then press ENTER within 4
seconds.
3 Within 4 seconds, turn MULTI JOG to select one
of the manual modes M1 - M4 to store the curve.
4 Within 4 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes M1 - M4 within 4 seconds.
The DSP (Digital Signal Processor) SURROUND adjusts the
delay time, the input mode and the feedback level to give a
resonant surround sound, allowing you to enjoy the real sound
presence of different environments.
This unit has been programmed with 4 different SURROUND
modes. You can also create and memorize up to 4 of your own
surround settings.
SELECTING
A
PROGRAMMED
DSP
SURROUND MODE
MULTI
JOG
-SURROUND
When you select the programmed DSP SURROUND mode, the
sound presence of a disco (DISCO), live music performance
(LIVE), movie theater (MOVIE) or concert hall (HALL) can be
obtained.
Press SURROUND, and turn MULTI JOG to select
the desired Programmed mode within 4 seconds.
-(■■■ '
DI SCO
“DSP SURROUND” appears and the DSP SURROUND mode is
displayed cyclically as follows.
DISCO
HALL-
DSPOFF
(cancel)
Ml
LIVE
* MOVIE *-
Programmed mode------
- M4 .1— M3 M2
‘..........Manual mode.......... ‘
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
To display the current DSP SURROUND mode
Press SURROUND. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press SURROUND, and turn MULTI JOG to select “DSP OFF”
within 4 seconds. “DSP SURROUND” disappears.
When the music source is monaural
Select “LIVE” or “MOVIE” to obtain a simulated stereo effect.
When “DISCO” or “HALL” is selected, no sound will be heard
from the surround speakers.
9
ENGLISH