Audiovox CTX5000 - Manual (Page 12)

To Receive Calls
1, When the telephone rings, lift the Handheld to
answer. | IN USE
1 indicator will light.
2. If the Handheld is out of the Booster when
ringing starts, press | SND \ to answer a call.
To Place a Call with a Number in the
Memory
1. Press fRCL \ , then enter the memory address (01
through 99). The last ten digits of the number
will appear on the readout. If the number is
longer than 10 digits, hold down the second digit
of the memory address (after pressing [ RCL|) to
see the prefix.
Note: See Recall a Number from Memory and
Want to Review the Prefix for more details.
2. Press I SND | . The | IN USE ] indicator will light as
a call is placed. You may lift the Handheld from
the Booster either before or after the called party
answers to proceed with your conversation.
To Mute Phone Conversation
1- Press I MUTE] . The | Mute | will appear on the
readout. The transmit audio will be muted
and the receive audio will be heard from the
loudspeaker. You may converse privately with a
passenger during a call with the handset either
“on-hook” or “off-hook”.
2, To return to normal conversation;
When not in the Hands-free Mode.
if “off-hook”, press the | MUTE | key.
if “on-hook”, lift the Handheld from the
Booster.
When in the Hands-free Mode,
Press the
1
MUTE | key, or lift the Handheld
from the Booster,
3. Mute is reset when call is terminated.
Call in Progress Protection (when
handset is using Booster)
Phone conversation will continue after ignition is
turned off until call is terminated.
22
CALL RESTRICTION
(NAM OPTION)
This feature permits you to impose various kinds of
restrictions on Outgoing Calls.
To Set Mode of Call Restriction
Enter three digit Securit^Code (assigned by NAM),
then press 1
FUNC
1 , key [J] then [7] .
The following key operation is needed to activate
one of the restriction modes;
|T]: Only telephone numbers having 11 digits
or less accepted. Operator assisted
dialing is prohibited.
[ 2]: Only telephone numbers having 7 digits
or less is accepted. Operator assisted
dialing is prohibited,
|~^; Operator assisted dialing (0 Origination)
is prohibited.
[4~[: No phone calls can be placed except for
repertory dialing from memory address
01 to 09.
; No restriction.
To Exit Call Restriction Programming
Mode
Press I FUNC I, then | CLR 1.
Note: (1) When in mode 4, number storage into the
memory will not be permitted.
(2) In the restriction mode, a short beep tone
will be heard to inform you of the wrong
operation, and the word | RestricteTI will be
shown on the readout.
HANDS-FREE OPERATION
(NAM OPTION)
(when Handset is Using Booster)
This feature permits you to engage in conversation
without lifting the Handheld Portable Unit.
(P After receiving a calUpress | SND | to answer),
conduct the conversation via the hands-free
external microphone and the loudspeaker in the
Booster Unit.
Speak a little louder than you would when using the
handset.
It is preferable to turn-off the radio or stereo and
close the car windows.
23