Audiovox CTX5000 - Manual (Page 10)

Even if'the unit is in the Backlighting-OFF mode,
for the duration of 10 seconds after any key
operation and when a call is received, backlighting
will be turned on again automatically.
To return to the Backlighting-ON mode, press
key
KEY
RCL then i again.
Volume Control
The audio level of the loudspeaker, earpiece and the
alert tone can be adjusted by the Volume Control
Button [ v OL| .
• Loudspeaker; Leave the Handheld in the Booster.
To increase-Keep pressing | VOlTI until you get the
desired sound level.
To decrease-Keep pressing [VOL \ until you get
the desired sound level,
Sound level will be displayed on the readout
digitally during the level adjustment and the sample
tone will indicate the sound level when you are not
engaged in a telephone conversation. Display format
is as follows.
SPK I I j (1 to 10)
• Earpiece: Lift the Handheld Portable Unit or
Handheld only, perform the same procedure as
above.
In this case, the display format is as follows.
H.S [ I i (1 to 9)
• Ring Tone; Press | RCL~| , key j^then
Then adjust the ringing tone level in the same
manner as above. Your telephone will ring at the
new leuels.
In this case, the display format of the readout is
as follows,
ALT PT~j (1 to 5)
MEMORY NAME TAG
This feature permits you to tag an identifying name
(in 5 letters) to each telephone number in the
memory address. The n a m e will be displayed each
time you recall a number from memory address.
To Enter Names using Alpha
1. Press [FUi^. then | VOL]. | Alpha | will appear in
the display to show Alpha Mode is active.
2. Press digit keys repeatedly until the letter you
wish appears. The following table shows which
character is assigned with each digit key.
18
ASSIGNED ALPHA CHARACTERS
1 (Blank) - 1
2 (ABC) A B c 2
3 (DEE) D E F 3
4 (CHI) G H I 4
5 QKL) J K L 5
6 (MNO) M N 0 6
7 (PRS) P Q R S
8 (TUV) T u V 8
9 (WXY) w X Y Z
0 0
#
3. When the letter you wish is displayed, press
I
VOL I to move to the next space.
4. Go back to step 2, and repeat the same
procedures until the complete five character
name is displayed.
5. When an entry error is made, press | CLR
1
momentarily to erase the last character. If you
press [CLR] more than a second, all characters in
the display will be erased,
6. To exit Alpha Mode, press I FUNC I , then I VOL I .
To Store Name with Phone Number
1. Enter the phone number.
2- Press [
FUNCl , then | VOL ] to set Alpha Mode.
3. Enter the name you wish, (Refer to “To Enter
Alpha Letters”)
4. Press
I
STO j, then enter the memory address (01
through 90), to store the number with the name
into memory.
Note; If you enter the phone number after
entering the name, the name will be erased.
Example; To store the phone number 123 — 4567
with the name JOHN, into memory
address 15.
1. Enter the phone number; 1 2 3 4 5 6 7
3, Enter the Name;
1FUN^ [ vol I
1 5 il VOL
] 11
VOL 1
a)
(0)
!4|t4l|VOL| t6i|6||VOL|
(H)
4. Store the Number; j STOj
19