Bolens 19967-1 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/^****N
FIGURE 14
11.
Position V-belt over large pulley on snow
_ thrower housing. See figure 14.
12.
Twist V-belt 90° to the left and feed on to right
— hand drive pulley. See figure 15.
FIGURE 15
13.
Lift idler and push V-belt under it to create
tension on the belt.
A CAUTION
Idler bracket is under spring tension.
Exercise caution.
FIGURE 16
This manual is related to the following products: