Bolens 19967-1 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 23
FIGURE 24
HUTE CRANK BRACKET (M)
9. Turn steering wheel to the right to allow
clearance for guide plate rod.
10.
Align holes on guide plate with lower holes on
tractor. Slide rod through holes. Secure with
hair pin cotters.
11.
Assemble the crank support tubing to the snow
thrower housing. Secure in place with two hex
bolts (0), lock washers (P) and hex nuts (Q).
See figure 24. An adjustable wrench and 1/2"
wrench are required.
Place the chute crank bracket (M) in position on
the crank support tubing. Slide the chute crank
through the top of crank support tubing. Start
hand knob (N) in crank support tubing. See
figure 25.
FIGURE 25
12