Owner’s guide update – Bryant 463AAC008BA User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Owner’s Guide Update
In order to provide maximum wind and rain protection, please apply the sealer compound
provided with your window unit.
This sealer can be applied directly from the tube Form a ‘bead' of sealer compound on the
outside of the unit, at the places shown below Form a continuous bead of material along the top of the
unit, where the cabinet joins the top window channel. Extend the bead around the comer and down
each side, covering the joint between each side window panel and the cabinet
Sealing can be done before the cabinet is installed You may also apply the sealer after the cabinet is
installed, taking care to reach outside, but do not lean out of the window. You may lift the window
sash, and the cabinet will stay in place. Apply the sealer along the top channel. Compress each side
curtain, and apply the sealer by reaching around the side of the curtain on each side
The sealer compound can be formed with the tip of the tube, with a disposable plastic spoon, or with
your finger. You may rework the sealer with your fìnger or plastic spoon for seveial minutes before it
starts to set Follow the directions on the tube of sealer for cleanup
SEALER COMPOUND
OUTSIDE
Rev A