Bryant 463AAC008BA - Manual (Page 10)

Installation Instructions
C Adjust the leveling screws until the bracket tilts
no more than 3/16” downward to the outside Do
not allow the bracket to slant inward as
condensation could possibly drip on interior walls
and floors See (Fig. 11)
D- Cut the 1st foam sealing strip to fit the underside
of the bottom window sash Remove the peelofl"
backing on the foam and attach it to the sash See
(Fig 12)
7 Installation of Mounting Brackets and
First Sealing Strip (Model 463AAC008BA)
NOTE' Windows come in a variety of different
styles Therefore, it may be necessary to modify
or improve your particular installation
A Attach the bracket assembly to 90°angte support
brackets {Fig 13) using (2) 1 1/2" bolts
Two bolts per bracket Secure with the (2)
1/4” lock washers and (2) 1/4"nuts DO NOT
immediately tighten these bolts as it may be
necessary to adjust the depth of the bracket
assembly, depending on the depth of your window sill
See (Fig 14} install the two leveling screws into the
90 support brackets Test the bracket assembly in the
window before cabinet installation If the leveling
screws are distanced too far away from the wall to
provide stability, it may be necessary for you to shim
this area with a solid piece 5f wood See (Fig 15)
Fig 14
Frg 15
9
-