Bulldog Security DELUXE 500 - Manual (Page 7)

LCD REMOTE CONTROL TRANSCEIVER
OPERATION
7. EnaUa / DInbla Beep Sound While Prenlng Button:
It has a short'br sound while - ■ ■■ _ the F button of the LCD screen
transceiver. If you want mute the 'bl' sound mute always while press
button. Press the Fbutton first, within 3 seconds press and hold the ^
fBI) button for 2 seconds to disable the 'beep' sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short "beep" sound
and flash CD icon while pressirä the button of the LCD screen transceiver.
9. Set Up Fbced Count Down linier:
1. Press the F button first, within 3 seconds press and hold the ^
f Ö] button for 2 seconds, the LCD screen will shows Ö Icon and timer
fie. 0:10].
2. Press the (Ö) button again showing next order time on the screen
(le.0:20], press them again (le.0:30].....and so on.
3. Leave the buttons starting count down then Ö icon flashes.
Note:
1. The count down period Is fixed as 10 minutes, 20 minutes, 30 minutes,
1 hour, 1.5 hours and 2 hours maximum.
2. When count down timer showing 0:00 means to turn off the timer.
3. Press the F button for real time Indication when the timer Is counting
down.
Id. Out Of Range Indication:
The s^tem will automatically check the range every 20 minutes after
armed.
1. If user Is within the range, the ^ loon will display on the LCD screen.
2. If user is out of range, it has five short "bi' sounds and the ^ icon will
disappear on the Lw screen.
TIMER SEIIING CHART:
Transceiver
Button Deacrlptlon
Press
Transceiver Button
1 Press and hold the
F button for 3 sec.
Timer Sotting (Hour)
*Flash digit for atljusting
♦ for - and № fbr *
Press the F button once Time setting [Minute]
"Flash digit fbr adjusting
+ for - and ¥ for t
F. ALARM OPERAnNG OONDITION:
Horn/ Parking
_____________ Üiaü________ Ь9ЬН_______
1. Arming
2. DIsannIng
3.lugger
4. Passive
Starter
Disable
5. Panic
6. Car-jacidna
7. Car Locator
1 or 3 ChltTB
2 or 4 Chirps
Alaimlng
Alarming
Alarming
S Chirps
1 Flash
2 or 3 Flashes
flashes
Hashes
flashes
12 Flashes
LED
Slow flash
Stow flash
Ftet Flash
sm.
Looking
Unlodclng
SeüL
Disable
mwt
Tbrns on for 30 sec.
Linking
Disable
Disable
flashes
Hashes
Hashes
G. ACTIVE ARMING - LOCK & ARM:
1. Press the fl button on the transmitter.
2. The sinen will chirp once and parking lights will flash once and remain
ON for 10 seconds indicating that the system is now armed. The
vehicles doors will lock upon arming when interfaced with the security
systems keyless entry.
Clear Hie Flaeh loon:
Press the F button 3 times within
3 seconds will clear the flash icon
on the LCD screen transceiver.
System Arm Door Ajar
" ^8-3u "B--30
Q li. a
%
^-juwco"
1
22