Bulldog Security DELUXE 500 - Manual (Page 6)

в. TWO-WAY LCD REMOTE CONTROL TRANSCEIVER OPERAHON:
LCD яемоте сомпюс.тшимс£ЕтаЕа
Transceiver
Button System Function Remark
F-F-fl (C) System's Status Check Press within 3 sec.
Monitor Indoor Temperature Press within 3 sec.
F- * ( 0 ) Daily Timer Start Press within 3 sec.
F (Isec.) LCD screen lamp turns on for 5 seconds. Press and hold for 1 sec.
F-F-F Clear the Flash Icon and Melody Sound
on the LCD Screen Transmitter Press within 3 sec.
с. LED Stabs Display Chart: D. Chirp Indicators
LED Function Chirp Function
Off Disarmed 1 chiro Arm
Slow Flash Armed 2 chirps Disarm
Fast Flash Passive Arming 3 chirps Ajar Warning
On (solid) Valet Mode 6 chirps Car Locator
E. Parking Lght Indicator Display Chart:
1 Flash Arm
2 Flashes Disarm
12 Flashes Car Locator
Constant On Under Remote Start Operation
Transceiver
Button Description
Press
Transceiver Button
2 Press the F button once. Alert Alarm
Time Setting (Hour)
*Flash digit for adjusting
for-and ^ or +
Press the F button once Alert Alamn
Time Setting (Minute)
*Flash digit for adjusting
for - and ^ for +
Press the F button once Alert Alarm Setting ON/OFF iCforOFFand^forON
3 Press the F button once Count Down
Timer Setting (Hour)
*Flash digit for adjusting
(Max. 19 hours 59 minutes)
♦ for-and IS fort
Press the F button once Count down Timer Setting
(Minute)
*Flash digit for adjusting
♦ for - and ^ for +
Press the F button once Count down Timer
Setting ON/OFF ♦ forOFFandiSforON
4 Press and hold the 11
button for 2 seconds.
Dally Timer Start Timer
Setting Flash 0/(oicon
and "Hours' for adjusting
♦ for-and IS fort
EXIT: Press and hold the F button for 2 seconds or leave it for 10 seconds
and the system will automatically exit the programming mode.
23