AEG MCC 3881 E-M EN - Manual (Page 40)

What should I do if the oven doesn't work?
WHAT SHOULD I DO IF THE OVEN DOESN'T WORK?
WARNING! Any type of repair must only be done by a specialised technician. Any repair done by
a person not authorised by the manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve the following questions:
• The display is not showing! Check if:
- The time indication has been switched off (see section on Basic Settings).
• Nothing happens when I press the keys! Check if:
- The Safety Block is active (see section on Basic Settings).
• The oven does not work! Check if:
- The plug is correctly fitted in the socket.
- The oven's power is switched on.
- The door is completely closed. The door should close with an audible click.
- There are any foreign bodies between the door and the cavity front.
• When the oven is operating I can hear some strange noises! Check if:
- There is any electrical arcing inside the oven caused by foreign metallic objects
(see section on type of ovenware).
- The ovenware is touching the oven walls.
- There are any loose items of cutlery or cooking tools inside the oven.
Substitution of light bulb
To substitute the light bulb, proceed as follows:
• Disconnect the oven from the power supply. Take the plug out of the socket or switch
off the oven's power circuit.
• Unscrew and remove the glass light cover (1).
• Remove the halogen light bulb (2). Warning! The bulb may be very hot.
• Fit a new G4/12V/10-20W halogen bulb. Warning! Do not touch the light bulb surface
directly with your fingers because you may damage the bulb. Follow the lamp
manufacturer's instructions.
• Screw the glass light cover into place (1).
• Connect the oven again to the power supply.
39