When the oven is working, 25 when the oven is working, Interrupting a cooking cycle – AEG MCC 3881 E-M EN User Manual
Page 26: Altering parameters, Cancelling a cooking cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the oven is working...
WHEN THE OVEN IS WORKING...
Interrupting a cooking cycle
In both cases:
• Microwave emission is stopped immediately.
• The grill is de-activated but is still very hot. Danger of burning!
• The timer stops and the display shows the remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be evenly cooked
2. Change the process parameters,
3. Cancel the process by pressing the Cancel key.
4. To restart the process, close the door and press the Start key.
Altering parameters
The operating parameters (time, power, temperature) can be altered when the oven is operating
or when the cooking process has been interrupted by proceeding as follows:
1. Select the parameter to be change with the Parameter selection keys. The respective
symbol and the display start blinking.
2. Set the desired value with the Plus and Minus keys.
3. Press the Confirmation key or wait 3 seconds to validate the new parameter value.
The display and symbols stop blinking.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press the
Cancel
key twice.
You will then hear a beep and the time will appear on the
display.
25