Oven ceiling – AEG MCC 3881 E-M EN User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oven cleaning and maintenance
Oven ceiling
If the oven ceiling is dirty, the grill can be lowered to make cleaning easier.
To avoid the danger of burning, wait until the grill is cold before lowering it. Proceed as follows:
1. Turn the grill support by 180“ (1).
2. Lower the grill gently (2). Do not use excessive force as this may cause damage.
3. After cleaning the ceiling, put the grill (2) back in its place, carrying out the previous
operation.
IMPORTANT WARNING:
The grill heating element support (1) may fall when it is rotated. If this
happens, insert the grill heating element support (1) into the slot in the ceiling of the cavity and
rotate it 90° to the grill heating element support (2) position.
The mica cover
(3)
located in the ceiling must always be kept clean.
Any food remains that
collect on the mica cover can cause damage or provoke sparks.
Do not use abrasive cleaning products or sharp objects.
To avoid any risk, do not remove the mica cover.
The glass lamp cover (4) is located on the oven ceiling and can be removed easily for cleaning.
For this you just need to unscrew it and clean it with water and dishwashing liquid.
Accessories
Clean the accessories after each use. If they are very dirty, soak them first of all and then use a
brush and sponge. The accessories can be washed in a dish washing machine.
Make sure that the turntable plate and the respective support are always clean. Do not switch
on the oven unless the turntable and the respective support are in place.
38