Audiovox MVX501 - Manual (Page 16)

Call Time Warning Tone
You can turn the Call Time Warning Tone on and off. When it is
set to on, a single warning tone will be heard every 1 minute and a
double warning tone will be heard every 5 minutes during a call.
To Turn the Warning Tone ON:
1. Press ( fn S), <£), while not in use.
"Ъ£ЕР oi-t” will be displayed.
2. Press to clear the display.
To Türn the Warning Tone OFF:
1. Press (O’again while not in use. On/off
toggles and “ЬЕЕР oFP” will be displayed.
2. Press (щ) to clear the display.
8Ш MANAGEMENT (Programmable Option)
You can take advantage of a family of SID (System Identifi­
cation) groups by this Programmable option. This is a group
of cellular systems in cities that your carrier owns or has
special billing arrangements with. Your close family SID’s
will be billed at the same rate as your home billing. (Both
NO SVC and ROAM are off.) More distant family SID’s will
be billed at a preferred rate. Your phone will display solid
ROAM. When flashing ROAM is displayed, you are using
a SID system that is not included in the groups assigned at
the time of programming.
If your display indicates NO SVC, you will need to change
your A/B system selection or, please refer to Multiple City
Registration to change phone registration to enable you to
make a call.
A/B SYSTEM SELECTION
You can select the system you need to use. The system that you are
registered with is the preferred system and your home system.
To select Standard Mode, press
To select System A Only Mode, press (^(6^(T2)-
To select System В Only Mode, press
To select Home Mode, press (р^(в^(з^.
To select Famility First Mode, press
To check the current system selection, press (™c)(63(S)-
To clear the display, press (@).
Note: When you turn your phone on, your phone will
start to scan the system of the last power-off.
28
Standard Mode:
Your phone will scan the preferred system channels. If un­
able to find an acceptable preferred channel, your phone
switches to scan the non-preferred system channels. “A B”
will light in the display.
System A Only Mode:
Your phone will scan the system A only. “A” will light in
the display.
System B Only Mode:
Your phone will scan the system B only. “B” will light in
the display.
Home Mode:
Your phone will scan preferred system and Brother/Sister
system channels.
You can place or receive calls only within your Home area.
Family Mode:
Your phone will scan both systems A and B regardless of
Brother/Sister or Cousin system channels.
MULTIPLE CITY REGISTRATION
You can reprogram the different phone numbers for the cit­
ies in which you are registered. Each programmed phone
number will be designated as your home system.
Note: You must register your phone with the carrier to
get the system ID number and your phone num­
ber.
To Program the Phone Number:
1. Press (cS), then enter the new system ID number (5 dig­
its).
2. Enter corresponding phone number including your area
code (10 digits).
3. Press (#3.
4. Enter the 3-digit Unlock code.
After programming the new number, your phone auto­
matically wakes up again and displays the new phone
number.
Note: Calls are placed or received using the programmed
phone number only.
29