Audiovox MVX-500 - Manual (Page 9)

2. Press [йог Я.
1Й : Scroll upward (with roll back to 01)
Й iScroll downward (with roll up to 99)
Memory address and the last 7 digits of the stored
number will be displayed on the readout as fol­
lows.
Example:
Address No. Tel. No.
Note: In this scroll feature, any vacant memory
addressees) will be skipped.
Automatic Storing into a Vacant
Memory Address
This feature allows automatic storing into a vacant
repertory memory address. This ends the possible
problem of writing over a previously stored number.
1. Enter the phone number.
2 .
3. Enter the memory address group number in which
you ’^nt to store a number.
From 01 to 10
From 11 to 20
From 21 to 30
From 81 to 90
From 91 to 99
From 01 to 99
4. Press 3J •
The memory address and the last 7 digits of the
stored phone number will be displayed on the
readout as follows.
Note: If there is no vacant address in the assigned
area, the phone number will not be stored in
the memory.
Secret Memory
This feature allows you to store ID code, telephone
credit card numbers, etc. in secret memory locations.
For security purposes, you must enter your three-
digit security code to display the secret number. For
practical use of the secret memory, refer to “END-
TO-END SIGNALING”.
To Store the Secret Number
1. Press
2. Press , then enter secret number.
, then enter the memory ad­
dress (01 through 99).
will be displayed on the readout.
Example: To store the secret number 9876 into
memory address 41 or automatically store
this number into a vacant memory ad­
dress of 40's.
1. Press FCtBi.
2. Enter secret number
3. Press
4. Press keys |
. (secret memory store)
!. (address niimber)
or
press keys Э, Ц]. (to store vacant memory
address of 40's)
To Confirm the Secret Number
1. Enter the three-digit security code.
2. Press , then enter the memory address (01
through 99). The last 10 digits of the secret
number will be displayed on the readout.
Example: To confirm the secret number stored into
memory address 41.
1. Enter the three-digit security code
2. Press I, key Й0 then
Note: If you recall the secret memory without the
three-digit security code, the secret number is
not displayed on the readout as shown below:
Press
or
Press
, key В then
i key м3 then
To Lock the Unit
Press , then key m (LOCK).
The indicator lights. The unit will remain
locked until unlocked, even if the power is turned off.
16 17